To place an order or for information call or email us today! 954-476-1194
 updplastics647@bellsouth.net


Welcome to the Monza Boat Windshields main page. Here scan down this page and look for your boat by year, and footage. Click on it, and you will then be able to view pictures, schematic sizes, color samples, and prices! All shields are made to order from our molds. We do not stock windshields. Could not find your windshield in our stock mold search? No problem, we can make you a new one whether you have the old one or not! Click here to learn how!

Our shields are the highest quality windshields you can purchase. No factory seconds, or inferior quality material that will craze or discolor before it's time. We use Cell Cast Acrylic Material. We hand polish all our edges. No flame polishing is used as this causes crazing of the material within a few months. You can expect to get nothing but top quality from UPD Plastics 31 years of fabrication experience.

 

  
   
     
      Free Drill Bit With Each Shield!

Ask for free rubber spacer washers if you need them! 		Free Rubber Grommets With Each Shield!  
   
 
Click on your model boat below to proceed to your stock mold windshield information!
If you do not see your shield listed here, then we do not have a specfic mold for your shield. Please do not contact us to see if we have one! Please go to our "Ordering a Windshield" section and provide us with the measurements, and pictures we require so we can either cross check your shield information with other molds we have or if we do not find a match we will then have the information to refabricate a new one for you. If you do not wish to do that you can send us your old windshield. In either case we cannot quote you without one or the other discribed above.

 

(call for availability)








Upd Plastics 2255 Sw. 70th Ave. Bld. 2 Bay 8 Davie, Fl. 33317 Phone/Fax 954-476-1194 updplastics647@bellsouth.net