I have a Windshield Quick Quote Form

(This form is only if you are shipping your old Windshield)

Before proceeding please be sure you have searched our web site for your shield before starting this process to save time. There are schematics there to help you. Click the link below to do that:

https://www.updplastics.com/windshield-manufacturers/

The are 3 requirements to submit this quote:

1. The windshield must be mounted to the console or boat.

2. There needs to be 3 pictures at eye level. Front, Side and a perspective shot.

3. The pictures must show the whole shield, no cutoff pictures please.

4. We must have .jpeg format pictures. No .pdf, zip, or other formatsas we cannot open them.

5. Must have 3 inside measurements, length, width, and height.

This field is hidden when viewing the form
NOTE: Please search for your windshield on our web site before filling out this Quote Form!
This field is hidden when viewing the form
Quote: Customer Information for consoles that have no Shield, and Shields not listed on our Web Site. It is advisable to please search our site for your shield before submitting this form!
This field is hidden when viewing the form
NOTE: Please do not ship your windshield until you get Authorization form us first!
This field is hidden when viewing the form
Today's Date of Quote
MM slash DD slash YYYY
Contact Name*
First Last
Business Name
We must have a business name if shipping to a commercial address.
Phone*
Email (Please be sure your email address is correct and add [email protected] to your safe list so we are not blocked and you will receive our confirmation of this Order!)*
Address*
Street Address City State / Province / Region ZIP / Postal Code Country

*We cannot ship to a PO BOX! We must have a physical address.
Please select one of the following:
- This is a commercial address
- This is a residential address
Commercial shipping address for large shields are much less then Residential addresses!
This field is hidden when viewing the form
Ship New Windshield to Information
Please enter all information as to where you want your new windshield shipped to.
This field is hidden when viewing the form
Please select one of the following:*
- This is a commercial address
- This is a residential address
This field is hidden when viewing the form
Contact Name*
This field is hidden when viewing the form
Business Name
We must have a business name if shipping to a commercial address.
This field is hidden when viewing the form
Address*
Street Address Address Line 2 City State / Province / Region ZIP / Postal Code Country
This field is hidden when viewing the form
This field is hidden when viewing the form
To ship your shield or not? Do not ship your shield till you get Authorization please!
This field is hidden when viewing the form
Please select one of the following:*
- 1-Yes, I would like to ship my old Windshield.
  2- If we find a match then there is only a 30.00 Transfer of holes Fee per shield. Holes are not transferred on large windshields, or any shield deemed to risky (Our discretion).
  3- If no match is found, we will replicate a new Windshield based on your old one. All holes must be present for us to transfer them! Shields that have missing holes (there should be a cardboard patch for the missing piece of shield with the hole in it, if not) we will not transfer the holes but will give you a drill bit kit with grommets and spacers to drill it yourself.
  
  4- If it has a blackout or Whiteout at the bottom we will transfer that as well for a cost of $30.00.
  
  *For additional instructions please specify in the Notes Box down below.
  
  *If this is a shield we do not have on our web-site will will ship the new one free shipping.
- 1-No, I do not have my old Windshield.
  2- We will use your measurements and pictures to replicate a new shield as close as possible.
  3- We will give you a drill bit kit with grommets and spacers to drill it yourself.
  
  4-. *For additional instructions, please specify in the Notes Box down below.
This field is hidden when viewing the form
This field is hidden when viewing the form
*3 Picture's at EYE LEVEL of the WHOLE Windshield Mounted to the Boat or Console if there is no Windshield (NO PARTIAL PICTURES) is Mandatory Please, to receive a Quote! FRONT, SIDE, AND PERSPECTIVE!
This field is hidden when viewing the form
3 Picture's EYE LEVEL of Whole Windshield Mounted to the Boat or Console if there is no Windshield is Mandatory Please to receive a Quote! FRONT, SIDE, AND PERSPECTIVE! It is necessary that we see the Whole Windshield mounted to the boat in order for us to make it. Failure to provide Picture's of a mounted shield could lead to fit issues which UPD Plastics inc. will not be responsible for. Please upload at least 3 pictures of your existing shield from different angles while on the boat! No Zip files Please! Only Jpeg's.*
Drop files here or

Max. file size: 128 MB, Max. files: 4.
Boat Information
Boat Manufactuer:*
This is the Manufacturer of your boat
Year of your boat:*
Boat Size:*
Boat Model:*
Quantity of Shields Desired*
Please enter a number from 1 to 20.
This field is hidden when viewing the form
Splash Lip bends forward at the top to deflect air?*
- Yes
- No
- N/A
This field is hidden when viewing the form
Center Console, Port, Starboard, or Both?*
- Center Console Style
- Port Passenger Side only (For any type of Boat with this application, usually dual console types)
- Starboard Drivers Side only (For any type of Boat with this application, usually dual console types, or Pontoon Style)
- Port & Starboard Side (for dual console Types)
- Wraparound Metal Frame with Glass or Acrylic
- Fly Bridge Type 1,2,3,4, or 5 piece shield
- One Piece Wraparound Acrylic Shield (for full deck large windshields)
- Multiple piece Wraparound Shield
This field is hidden when viewing the form
What situation does this quote pertain too?*
- I have my marine boat windshield
- I dont have a windshield but I have access to my boat console
Inside Boat Windshield Size (All measurents are required to receive a quote!)
This section must be completed to recieve a quote.
Failure to provide all mandatory measurements will result in a No Quote! Please fill in all measurements please!
Add your measurements
K = Section*
Inside length of shield. This is measured after the curve turns into the side panel). Failure to provide all mandatory measurements will result in a No Quote! Please fill in all measurements please!
G = Section*
Base of windshield front to back. Failure to provide all mandatory measurements will result in a No Quote! Please fill in all measurements please!
F = Section*
This is the center vertical height of the windshield. Failure to provide all mandatory measurements will result in a No Quote! Please fill in all measurements please!
Add your full measurements for more accuracy
- Add your full measurements for more accuracy
Quote! Please fill in all measurements please
F = Section*
This is the center vertical height of the windshield. Failure to provide all mandatory measurements will result in a No Quote! Please fill in all measurements please!
G = Section*
Base of windshield front to back. Failure to provide all mandatory measurements will result in a No Quote! Please fill in all measurements please!
H = Section*
Spread of windshield in the back at the base. Failure to provide all mandatory measurements will result in a No Quote! Please fill in all measurements please!
I = Section*
Inside measurement at the top. (Measured after the curve turns into the side panel). Failure to provide all mandatory measurements will result in a No Quote! Please fill in all measurements please!
J = Section*
Side of windshield front to back. ( Measured from front face of shield until the slope downward). Failure to provide all mandatory measurements will result in a No Quote! Please fill in all measurements please!
K = Section*
Inside length of shield. This is measured after the curve turns into the side panel). Failure to provide all mandatory measurements will result in a No Quote! Please fill in all measurements please!
Radius = Section*
The amount of Radius on the corners of the console. See download chart on the measuring page. Failure to provide all mandatory measurements will result in a No Quote! Please fill in all measurements please!
Tilt = Section*
The amount of degree of tilt/lean back of the shield. See it on the measuring page. Failure to provide all mandatory measurements will result in a No Quote! Please fill in all measurements please!
This field is hidden when viewing the form
Spacer Thickness (The inside distance between the windshield and the console)*
- None
- 1/8"
- 1/4"
- 3/8"
- 1/2"
This field is hidden when viewing the form
Console Size (All measurents are required to receive a quote!)
Only complete this section if your boat does not currently have a windshield. Failure to provide all mandatory measurements will result in a No Quote! Please fill in all measurements please!
This field is hidden when viewing the form
A = Length of console in the front at the bottom or above the seat:*
Failure to provide all mandatory measurements will result in a No Quote! Please fill in all measurements please!
This field is hidden when viewing the form
B = Outside length of the console on top near the front after the curve:*
Failure to provide all mandatory measurements will result in a No Quote! Please fill in all measurements please!
This field is hidden when viewing the form
C = Vertical Height Between A and B Measurements:*
Failure to provide all mandatory measurements will result in a No Quote! Please fill in all measurements please!
This field is hidden when viewing the form
D = Length of sides where the shield goes from front to back:*
Failure to provide all mandatory measurements will result in a No Quote! Please fill in all measurements please!
This field is hidden when viewing the form
E = Length of console in the back on top where the wings of the shield ends:*
Failure to provide all mandatory measurements will result in a No Quote! Please fill in all measurements please!
This field is hidden when viewing the form
F =Desired height of shield (include mounting area below the top of the console):*
Failure to provide all mandatory measurements will result in a No Quote! Please fill in all measurements please!
This field is hidden when viewing the form
Tilt (The angle the shield leans backward):*
Failure to provide all mandatory measurements will result in a No Quote! Please fill in all measurements please!
This field is hidden when viewing the form
Radius Corner (Complete Using the Radius Chart):*
The amount of Radius on the corners of the console. See download chart on the measuring page. Failure to provide all mandatory measurements will result in a No Quote! Please fill in all measurements please!
This field is hidden when viewing the form
Spacer Thickness (The inside distance between the windshield and the console)*
- None
- 1/4"
- 3/8"
- 1/2"
Desired Thickness & Color
Windshield Thickness*
- 3/16"
- 1/4"
- 3/8"
Windshield Color. If you want to match the color of the old shield please state that.*
- CLEAR
- Coke Bottle Green - 2111 3/16" OUT OF STOCK, LIGHT GREEN AVAILABLE
- Transparent Blue (Not always available in 3/8") - 2069
- Opaque White (Cannot see through) - 7508 Holes cannot be transferred on this!
- Opaque Black (Cannot see through) Holes cannot be transferred on this!
- Light Bronze Smoke - 2404
- Medium Bronze Smoke - 2412
- Dark Bronze Smoke - 2370
- Medium Grey Smoke - 2064
- Dark Grey Smoke - 2074
Example of pictures needed
Drop your pictures below, front, side, and perspective. No cutoff pictures*
Drop files here or

Accepted file types: jpeg, Max. file size: 128 MB, Max. files: 4.
Additional Notes
All communication is through email format only to avoid confusion. We do not discuss Quotes, Orders or related matters over the phone
Type signatures*
Signature font
Please select signature font.
A Full Signature is Required for this order to be valid. Any non legible signature, or single name will prevent your Order from being processed! Use your mouse to sign your name
This field is hidden when viewing the form
A full Signature is required
A Full Signature is Required for this order to be valid. Any non legible signature, or single name will prevent your Order from being processed! Use your mouse to sign your name
Comments
This field is for validation purposes and should be left unchanged.

Due to the high influx in quote requests, please allow several business days for a response. Thank you.

I have a Windshield Quick Quote Form

I have a Windshield Quick Quote Form

Before proceeding please be sure you have searched our web site for your shield before starting this process to save time. There are schematics there to help you. Click the link below to do that:

https://www.updplastics.com/windshield-manufacturers/

The are 3 requirements to submit this quote:

1. The windshield must be mounted to the console or boat.

2. There needs to be 3 pictures at eye level. Front, Side and a perspective shot.

3. The pictures must show the whole shield, no cutoff pictures please.

4. We must have .jpeg format pictures. No .pdf, zip, or other formatsas we cannot open them.

5. Must have 3 inside measurements, length, width, and height.

NOTE: Please search for your windshield on our web site before filling out this Quote Form!

Quote: Customer Information for consoles that have no Shield, and Shields not listed on our Web Site. It is advisable to please search our site for your shield before submitting this form!

NOTE: Please do not ship your windshield until you get Authorization form us first!

Ship New Windshield to Information

To ship your shield or not? Do not ship your shield till you get Authorization please!

*3 Picture's at EYE LEVEL of the WHOLE Windshield Mounted to the Boat or Console if there is no Windshield (NO PARTIAL PICTURES) is Mandatory Please, to receive a Quote! FRONT, SIDE, AND PERSPECTIVE!

Boat Information

Inside Boat Windshield Size (All measurents are required to receive a quote!)

Failure to provide all mandatory measurements will result in a No Quote! Please fill in all measurements please!

Add your measurements

Console Size (All measurents are required to receive a quote!)

Desired Thickness & Color

Example of pictures needed

Additional Notes

All communication is through email format only to avoid confusion. We do not discuss Quotes, Orders or related matters over the phone